Blades of Fate

Blades in the Dark clarified a lot of things that Fate 2 and Spirit of the Century tried to do, so I decided to steal its tech to go back over some old territory, mashing it up with new technology where appropriate. So, hang on tight.

Adjective Ladder

Step 1, we’re compressing the adjective ladder as follows:

X: Poor
0: Mediocre
1 : Fair
2: Good
3: Great
4: Superb

And done. You can extrapolate from there if you want, but that is the functional core, and to take it a step further, Poor and Superb only show up in very rare circumstances, so the heart of things is 4 steps. Compressing the ladder also means the honorable retirement of “Average” and years of discussions regarding the difference between mediocre and average. It also, I think, improves its conversational usability.

Dice Rolling

When you roll dice, you roll a number of Fate dice determined by the ladder, and pick the best one.

If it’s a (success) +, then you succeed, free and clear, based on the terms of the roll (more on that in a bit). This maps to a 6 result in BITD. Multiple Plusses map to a critical success.

If it’s a blank (Mixed), then you succeed, but the GM gets to complicate it in some way. This maps to a 4-5 result in Blades.

If it’s a – (Failure), then you fail, and what that means also depends on the terms of the roll. 1

Poor and Mediocre rolls

If you’re mediocre, then roll 2df and keep the lower. If you’re poor, you just fail.

Skills, Approaches and Whatnot

In fine Fate tradition, this supports any kind of descriptors. Skills? Approaches? Professions? Descriptors? Whatever. They all work. But you need to pick one and run with it.

For illustration purposes, we’ll use approaches, but please consider it the tip of the iceberg. This will be largely familiar to anyone who has played FAE, but the main difference is that in addition to each approach having an implicit meaning, it has implicit failure states and these matter a lot on mixed rolls and failures.

For example, the failure states on Flashy are 1) Insufficiently flashy and 2) only flashy. That matters because by default, a mixed means that you were flashy enough, but the problem emerges because you were insufficiently Quick or Forceful or some other approach that might have mattered. In contrast, a full on failure is a failure to be sufficiently flashy.

These failure states are not cast in stone – situations can freely generate exception – but they exist to give a more clear default for how to handle what approaches mean.

Terms of the Roll

When a roll is made, it has 5 components:

  • Action – The action and situation being described which has called for a roll
  • Effort – The skill/approach chosen and the dice rolled
  • Position – how risky of controlled the action being taken is.
  • Effectiveness – How well or poorly this is likely to work, under best/worst circumstances.
  • Effect – The result of all this. IN the case of a success, this is synonymous with effectiveness.

Action is either a whole thesis topic on its own, or perfectly obvious. The player has described an action which is sufficiently interesting, uncertain or both as to call for the dice. For simplicity, I’m going to treat this as a solved problem

Effort comes from the player: They choose which approach they’ll use, roll the dice (and make any decisions related to that die rolling).

Action and effort combine to determine position (which will be Free, Controlled, Risky or Dangerous2) and effectiveness (which will be potent, normal or weak). These are determined and communicated by the GM as a logical extension of the action and effort.

This is, explicitly, where the “That approach is bullshit” filter gets applied, especially with effectiveness. The GM is free too (encouraged even) to diminish effect for approach selections that seem more made for the bonus than the in applicability of the situation, and by the same token to reward clever approach selection with greater effect. This should not turn into a game of “Read the GMs mind for best bonus” but it should be resolvable within the bounds of common sense.

Position

Position impacts the effects of failure. Failure or mixed success from a controlled position tends to be have minor consequences. From a risky position, they can have more teeth, and from a dangerous position they can be very costly indeed.

I’m not going just restate the table from Blades, but in my head, that’s what we’re talking about.

Effectiveness

Just as position shapes failure, effectiveness shapes success. The best roll in the world can only make so much of a difference with the wrong tools solving the wrong problem. But on the flip side, the right tool for the job can make heavy work light. In practice, a success with potent effectiveness will have more punch (a free crit, perhaps) while weak effectiveness means diminished effect. Again, mentally I’m just stealing the Blades table for this at the moment.

Do we need both?

In theory, you could collapse position and effectiveness. You wouldn’t want to have a 3×3 grid because that would be fiddly, but a fair number of games tie effectiveness back to effort (by modifying the roll, with bonuses and penalties) and trust the diminished roll to reflect the diminished effectiveness. Of course a lot of games do the same with position as well, so we could arguably ditch both in favor of a more robust effort model. That kind of works, but it’s very game-logical rather than human logical.

But even beyond that, I like having the explicit GM tool to express an opinion. Explicitly calling out position and effectiveness forces a fruitful moment of clear communication between player and GM while providing protection against the rules getting too disconnected from reality.

The Free Roll

This equates to the Fortune roll in blades. A free roll has neither position more effectiveness (and is probably sketchy on action and effort) because it has no particular consequences, and is simply a roll the GM may call for to answer a question.

Crits

Success is more common in this system, but that’s fine – this is for somewhat friendlier games than those about cutthroat thieves. Trickier is the fact that it means criticals are more common, so we’ll need to make sure their meaning is very clear. Not fully unpacking that yet, but planting a flag as something to come back to.

Scale3

As with Blades, Scale affects position and effect because it encompasses both, and carries them to a greater magnitude. The most obvious example of scale is size – a mouse has a hard time fighting a horse, or a soldier an army – but it can encompass much more than that, including available time, appropriate tools, correct understanding an so on. Sometimes scale exists on a ladder (such as with tiers of size) but sometimes it’s a simple gateway (like a language barrier). It is a many faceted thing, but when something is impossible, the barrier is usually scale.

Functionally, scale’s impact on position and effectiveness are independent and situational. Sneaking past a giant robot might be no harder than usual, but punching it is unlikely to have much effect.
Now, the nuances of scale are very much a genre driver, because it speaks to the kind of situations that can come up and what things like a “fair fight” look like, so with that in mind, treat this generalization as very suspect.

Scale has only two meaningful steps (beyond parity): “Oh Crap” and “Oh, hell no”.

If it’s Oh Crap, then the scale difference is enough to make your life harder. One guy fighting a gang. One chef cooking for a wedding. It’s doable, but harder. This can imperil position, reduce effectiveness or both. If it’s Oh Crap for the other guy, that’s effectively reversed.

If it’s Oh, Hell No then you just don’t bother. You cannot fistfight an army, nor can you pick lock a bank vault. These are sufficiently out of scope that failure is presupposed and you go to the dice for things adjacent to it (like running away from that army you tried to fistfight).

Where this gets interesting (and genre raises its head) is where scale can be ignored or altered. A legendary bar fighter might be able to ignore Oh Crap in a bar fight. The god of bar fights might be able to punch an army (ignoring the Oh, Hell No).

Skills are flash, but scale matters

More critically, with planning and effort, a brawler might manage to get in front of an army at a point where they’re forced to come at him one at a time, overcoming scale with skill and cunning. It still probably won’t end well, but it’ll be a hell of a fight.

And that’s the rub. When we talk about “skill” outside of the RPG context, there is this idea of legendary skill, and legendary acts of skill, and when we map that to RPGs we tend to map that as very high values overcoming very high difficulties. The problem is that this only represents a very small subset of significant actions. Hitting a target can be dramatic an exciting, but it is a different order of action than, say, winning a war or curing a disease. There are entire categories of actions which are not resolved with a single act, but rather by steadily changing the situation so that something that started out as impossible becomes possible.

Scale is how you handle things like that and, critically, scale rules are how you communicate how important actions like that are to your game. Not every game needs a path to cure cancer or gather enough votes to become mayor.

All of which is to say that scale is a bigger deal than we tend to acknowledge, and how we handle it is a critical descriptor for genre.

Aspects, Fate Points and Stress

There is no mechanical reason not to port Stress into Fate. It’s not hard, and requires only a few decisions. The simplest model is this:

  • Fate Points and the stress track are now Stress Pool
  • Players may spend Stress to invoke an aspect to add a die to a roll
  • Compels replenish the stress pool.
  • Damage is taken to the stress pool
  • Consequences can ablate damage as normal
  • Devils Bargains effectively combine a simultaneous invoke and compel

This totally works as placeholder, but I’m going to put a pin in it because this is the the point where we need to stop and think.

Ok, So What’s The Point?

This text file had sat idle on disk for a while because I was not sure it was worth pursuing. It’s a fun technical exercise, but does it serve any real purpose? I couldn’t answer that until the other night, when we had a session of Blades where the dice were very strongly in our favor, and it pretty radically changed the tone of play for the session into something a little bit more cinematic and wahoo. Maybe not the tone we want in Blades all the time, but there are definitely games where that is exactly the tone I would want to hit. So that example persuaded me that there’s definitely room for this, but explicitly not as any kind of direct port, so I’ll be well served to re-examine any assumptions as I review them.

To that end, I suspect a focusing tool will be in order, so the next step will be, I think, coming up with an It’s Not My Fault variant version of this. It’s core system is FAE, but it may well benefit from a bit more structured play, and some concepts from Blades might help to that end.

All of which is to say, this is the rough starting point of an idea, and I’ll be refining it over time.

  1. Multiple minuses are not a critical failure because, if so, then almost every failure would be a critical failure. ↩︎
  2. I’m explicitly stealing Blades terminology here, but I’m also doing it by memory, so if you see a divergence from Blades, that is me making things up, not me pretending I’m not stealing from Blades. ↩︎
  3. I’m 80% convinced to rename this “scope” just to reflect how it’s used here. ↩︎

 

11 thoughts on “Blades of Fate

  1. James

    If a GM brought this over to TinyFate, which version would fit the Blades of Fate feel? I can see TinyFate “Basic” being fairly easy: the first Aspect Invoked is worth two dice. Advanced TinyFate would make it more granular: no Aspect, two dice and pick low; free Invoke, one die; and pull from the Stress pool to Invoke any number of Aspects for additional dice. The latter feels grittier.

    Reply
    1. Rob Donoghue Post author

      I’m genuinely not sure yet – I’ve been doing the mapping in my head and while I have a lot of options, I’m not 100% happy with any of them yet, but the model you suggest would absolutely work (but you’re also right that it’s maybe grittier than intended).

      I’m considering stealing a page from It’s Not my Fault and switching to a common fate point pool represented by X coins (X is usually 1 + 2x the number of players, but could be whatever). “Spending” a fate point flips a heads to tails. “Earning” a fate point flips a tails to heads. If it’s ever all heads or all tails, the situation changes dramatically. (Also, I use othello chips, because they’re easier to read). In this model, devil’s bargains would be freebies, and since the success rate on 1 die is pretty high, you hopefully only flip coins when your nervous. And if we add the rule that one option for a mixed result is “Success, but the GM flips a head to tails” then you get a good clock substitute.

      (Biggest problem is you need to give a better handle for player driven compels (or let them use crits to flip tails) but I feel like there’s something fun there. Need to think and experiment more, though.

      Reply
  2. James

    I like the idea of a built in timer. It has “reveal an unwelcome truth” written all over it, and the players can watch it tick down and fight against the clock. Definitely interested in seeing where this goes.

    Reply
  3. Pingback: Bites in the Dark | The Walking Mind

  4. C Rea

    Wait so correct me if Im wrong but when using Fate Dice in a dice pool and selecting highest one you will only fail if all the dice are (-) right?

    If there is a single blank in there you’re good. So when rolling 4 dice aren’t the odds of failure extremely low? The only way to fail is to roll all (-)

    Im considering running BitD setting in Fate but I think hacking it to use dice pools gets screwy

    Reply
    1. Rob Donoghue Post author

      Mirroring and expanding from G+: Yes! Success is MUCh more likely with Fate dice, but there’s still a decent chance of mixed results (which are usually super fun). Thematically, it’s better suited to a less hard/dark sort of game. (Also, the intent is that it makes having even 1 die in a rating fairly significant)

      As such, I’m not sure it works really well for Blades as Blades, but rather is more suited to, say, Blades as Leverage.

      Reply
  5. John Cooper

    Quick thought.

    Multiple minuses are not a critical failure because, if so, then almost every failure would be a critical failure.

    OR

    If you’re having some fun with die pools, and options, then you compare “+” and “-” and its a NET “+” that is a success, a NET “-” is a success with cost. Multiples ++ result in a success with style result, and multiple — result in a failure with a mishap. The number of + and – determine how severe the narrative.

    Do that and you can abandon the dF in favor of regular d6, treat a 5 or 6 as a Hit and a 1 (or a 1 or 2) as a Miss. I like the 5-6 as a Hit and the 1 as a Miss. Subtract Misses from Hits and you get a Net that determines effect, or, overcomes position, depending on how you design it.

    I’m playing around with this right now, for a setting that I’ve done in PbtA, Savage Worlds and Cypher before, and am now doing in Fate, because it is the simplest way to match up to my vision — but this die pool from BitD is interesting to me, and may make its way into my own adaptation of Fate. You can see things over on feytale.com and as thoughts mature for the Fate version I’ll start adding there.

    Reply
  6. Pedro Coutinho

    First off, I hope everyone is doing alright and healthy!

    I know it’s been a long time, but I’ve read this post *a lot* of times! I loved the mesh between Fate and Blades. I’ve been borrowing some mechanics from YZE too.

    In my group we’ve been using regular d6’s, Fate points as extra dice and Stress as modifier to the dice on a 1:1 ratio (1-3 fail, 4-5 tie, 6 success). It adds a degree of risk-and-reward, since the players are “getting tired” for “trying harder”. So far, it’s going fine and nothing has broken.

    Still, I’m curious: mr. Donoghue (not sure if I can call you Rob ‘xD ), have you “unpinned” the thought about Fate points and Stress mechanic ?

    Thanks !

    Reply
    1. Rob Donoghue Post author

      I keep toying with it, and it works in general – making stress recovery the payout for compels or the equivalent absolutely works in a general sense, but the devil is, as always, in the details!

      (And ‘Rob’ is 100% fine!)

      Reply
  7. Blake Hutchins

    I’ve run a bunch of both FATE and Blades, but I’mthe former, I’m increasingly dissatisfied with having to set target numbers and do any GM rolling, so this is an elegant way of scratching both itches. Really interested in trying it for an Aether Sea game.

    Quick question: when you spend FATE to flip a die, are you contemplating one level (e.g., — to []) or two (— to +)? I’d tend to say 1 shift up rather than two, so that spending a single Fate Point/Stress isn’t an auto-success. What’s your take?

    Reply

Leave a Reply to Pedro Coutinho Cancel reply

Your email address will not be published. Required fields are marked *